Texas Speed and Performance Gen 3 Hemi Stroker Cam Stage 1

Texas Speed and Performance Gen 3 Hemi Stroker Cam Stage 1

Unlock the potential of your big cubic inch Hemi engine with the Texas Speed and Performance Hemi Stroker Camshaft. Designed for street/strip applications, this camshaft delivers significant power gains and a broad, flat torque curve, ensuring exceptional performance across the RPM range.

Specifications

• Duration @ .050” (Intake/Exhaust): 238°/253°
• Lift (Intake/Exhaust): .622"/.618"
• LSA: 110°
• ICL: 109°
• *** VCT Lockout is Required to Run this Camshaft ***

Engines Best Suited For

2009+ Gen 3 Hemi Stroker 410+ Cubic Inch

Performance Highlights

• Power Output: 699 Peak Power, 577 Peak Torque
• Operating RPM Range: 1000-7200 RPM (max)
• Drivability: Designed for Street/Strip applications

Required Components

• Valve Springs: PAC-1232X or PRC-VS2226 springs required
• Pushrods: TSP 3/8 Pushrods required
• Pistons: Aftermarket pistons with valve reliefs

Recommended Components

• Retainers: TSP titanium retainers
• Rocker Braces: TSP rocker shaft braces recommended
• Stall Converter: 3600+ recommended
• Rear Gear: Gear selection will vary depending on application

Dyno Test Motor Specs

• Short Block: TSP 426 Brawler Short Block
• Cylinder Heads: Stock 6.4 heads PRC ported with PAC valve springs and TSP retainers
• Intake: Holley Hi-Ram Intake w/ 102mm throttle body
• Compression Ratio: 11.3:1
• VCT: Phaser locked
• Fuel: 93 Octane pump gas

Performance & Reliability

Backed by extensive dyno testing, the Texas Speed and Performance Gen 3 Hemi Stroker Camshaft delivers proven horsepower and torque gains. Whether you're building a high-performance street car or a drag machine, this camshaft is engineered for reliability and optimal power output.